Hobbico AquaCraft V24 R/C Gas Vee RTR
This is the Hobbico V24 One-Design gasoline powered, radio controlled ready-to-run Racing Boat
Dominate the water... with an offshore racer that's as user-friendly as it gets! At 4-1/2' long, the V24 One-Design Gas Boat skims across wakes with ease, with futuristic looks that make it really stand out. And because it comes Ready-To-Run and is powered by regular gasoline, the V24 is incredibly easy to operate and maintain. It's never been simpler to make a BIG splash in R/C boating!
Features
* Hull: Constructed of painted fiberglass, gulled-wing race boat design, double-stepped to reduce surface contact with the water. Strakes on the underside run parallel from the bow to transom to give the hull more bite in turns and lift at the bow. Vertical fin at rear assists with stability at high speeds. Conventional R/C hulls want to bounce around in rough water. Air will get under the boat and the driver will need to slow down and stabilize the boat. Where as with the V24 exhibits an uncanny ability to remain level under the same conditions and blast ahead like a dart
* Radio: Futaba 2PEKA FM pistol grip with End Point Adjustment (EPA) and dual rates
* Servos: S3305 high-torque metal geared servo for operating the Super Wedge rudder, S3003 standard servo controls the throttle
* Radio Box: Constructed of fiberglass with waterproof exit boots and clear plexiglass lid
* Engine: Preinstalled Fuji BT-24 (FJIG0124) with recoil starter and, waterproof kill switch, requires only regular gasoline and 2-cycle oil
* Tuned Pipe: Spun aluminum with stainless steel support bracket
* Cooling System: Tri-Flow water cooling system with water pickups in rudder and both trim tabs that channel water up and around engine, exhaust flange header and tuned pipe
* Drive System: Adjustable Surface Drive (ASD) allows manual angle adjustment of the propeller. Adding a 3 channel radio system allows you to have an on-board adjustable surface drive system. All components including rudder, trim tabs and ASD are constructed of aluminum. Machined anodized trim tabs feature stainless steel ride plates with hex head bolt for precise adjustments to improve handling. 1/4" Flex Drive and 4-40 size steering linkages with steel clevises
* Propeller: Stainless steel, 2-blade, 2.5" (65mm) diameter
* Fuel Tank: 24oz (710cc) gasoline tank with long neck for easy fueling full tank powers boat for approximately 40 minutes
Watch the Video Footage of the AquaCraft V24 R/C Gas Vee RTR
Featured RC Hobby Shops :
Copyright © 2004 - 2009 , 2010,2011,2012,2013 - 2104 RC Plane Chat .com. All rights reserve